Ikhoyili yentsimbi eGrey ppgi, uLuhlu lwamaxabiso entsimbi yentsimbi epeyintwe kwangaphambili

Grey ppgi Steel Coil, Prepainted Galvanized Steel Coil Price List Featured Image

Inkcazelo emfutshane:

Ikhoyili ye-ppgi eqatywe ngombala ikwabizwa ngokuba yicoil yentsimbi epeyintwe ngaphambili (imfutshane ethetha "ikhoyili yeppgi"), isebenzisa igalvanized njenge substrate.Emva kokunyangwa komphezulu (ukususwa kwekhemikhali kunye nokuguqulwa kweekhemikhali), intsimbi engwevu ye-ppgi igqunywe ngomaleko okanye iileya ezininzi zokugquma, ngokubhaka kunye nokunyanga, emva koko ube yiPPGI. i-zinc layer idlala indima ekugubungeleni nasekukhuseleni i-coil yensimbi ehlanganiswe nombala, ukukhusela i-coil yensimbi ekugqweseni, kunye nobomi bayo benkonzo malunga namaxesha angama-1.5 ubude kunalowo we-galvanized coil.

Ifilimu yepeyinti esinokuyenza i-10-30microns.Ukuphakama kwefilimu yepeyinti, ixesha elide ubomi benkonzo yombala.

Izinto zokupeyinta ziyi-PE, SMP, HDP, PVDF, ects.

Umbala we-Pupolar we-coil yentsimbi epeyintwe kwangaphambili: iwayini ebomvu (i-ral3005), idangatye elibomvu (i-ral3000), i-Ruby ebomvu (i-RAL3003), i-Signal ebomvu (i-RAL 3001), i-Coral ebomvu (i-RAL 3016), i-Red Traffic (RAL 3020)

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

PPGI Coil Coil

1. Ipeyinti ephezulu: PVDF, HDP, SMP, PE, PU

2.Primer Paint: Polyerethane, Epoxy, PE

3.Ipeyinti yangasemva: I-Epoxy, iPolyester eGuquliweyo

Inkcazo yekhoyili yePPGI

Ukutyeba	0.12mm-1.5mm, (11gauge-36gauge, okanye ngokwemfuno yomthengi)
Ububanzi	750mm-1250mm (okanye ngokweemfuno zomthengi)
Umgangatho	GBT2518-2008, ASTM A653,JIS G3302,EN 10142, kunye njl.
Ibakala lezinto eziphathekayo	SGCC/SGCH/CS Uhlobo A kunye ne-B/DX51D/DX52D/G550/S280/S350 ETC.
I-Zinc yokugqoka	Z30-Z275g
Umgangatho wombala	Inombolo ye-RAL njengesicelo somthengi
Ukwaleka	Ukwambathisa okuphezulu: 5-30UM
Ukwaleka	Ukwaleka ngasemva: 5-15UM
Isiseko sentsimbi	Intsimbi eGalvanized
Unyango lomphezulu	I-Passivation okanye i-Chromated, i-Skin Pass, i-oyile okanye i-Unoiled, okanye i-Antifinger print
Ubunzima bekhoyili	Iitoni ezi-3-5 okanye njengemfuno yomthengi
Coil yangaphakathi Diameter	508/610mm okanye ngokwesicelo sakho

PPGI Ikhoyili RAL Imibala

Ikhoyili engwevu ye-ppgi ngaphandle kombala, inemibala eyahlukeneyo yokukhethwa ngumthengi.

Abathengi banokujonga uluhlu lwamaxabiso egrey ppgi nge-ral NO.kunye nobukhulu kunye nobubanzi.

Isicelo se-PPGI Coil

Ngokutsho kophando lwamashishini kwiminyaka yakutshanje, i-ppgi coil / i-coil yentsimbi epeyintiweyo iseyindlela yokukhula kulwakhiwo, ubunjineli, ukufuya izilwanyana, i-photovoltaics, izixhobo zasekhaya kunye namanye amashishini, ngakumbi ukusetyenziswa kolwakhiwo, ukufuywa kwezilwanyana kunye ne-photovoltaics.

Iikhoyili zentsimbi ezigqunywe ngombala zinemisebenzi emininzi, umzekelo:
Ishishini lokwakha: izicelo zangaphandle: uphahla, izakhiwo zophahla, izivalo eziqengqelekayo, iikhiski, izivalo, iingcango zokulinda, amagumbi okulinda ezitalatweni, imigudu yokungena umoya, njl.
Izixhobo zombane: iifriji, izitovu zomoya, izitovu ze-elektroniki, iigobolondo zoomatshini bokuhlamba, izitovu zeoyile, njl.
Ishishini lezothutho: iisilingi zemoto, iipaneli ezingasemva, iihoardings, amaqokobhe emoto, iitrektara, iibulkheads zeenqanawa, njl.
Eyona isetyenziswayo:iiworkshops zentsimbi, iiworkshops zebhodi ezidityanisiweyo, kunye neefektri zeethayile zentsimbi ezinombala.

FAQ

Umbuzo: Ngaba uyabonelela ngesampulu ye-ppgi coil?
A: Ewe, sinikezela ngesampuli.Isampuli isimahla, i-courier yamazwe ngamazwe iphethe.

Iindleko zekhuriya ziya kubuyela kuwe xa sele sibambisene.

Q:Ngaba uyalwamkela uhlolo lomntu wesithathu?
A: Ewe, siyakwamkela ukuhlolwa komntu wesithathu.
Umbuzo: Liliphi ixesha lokuhambisa?
A: Ngokubanzi 25-35days.
Umbuzo: Ngaba unaso isitokhwe?
A: Ngemveliso yesitokhwe, nceda uqhagamshelane nathi ukuze uqinisekise.