China ifektri ppgi coil matte 0.23mm 0.29mm RAL9004 uphawu umbala omnyama

China factory ppgi coil matte 0.23mm 0.29mm RAL9004 signal black color Featured Image

Inkcazelo emfutshane:

I-PPGI coil matte enophawu lombala omnyamasebenzisa intsimbi yegalvanized as substrate.I-ppgi yentsimbi ye-coil surface egqutywe ngomaleko okanye iileya ezininzi zokugquma, ngokubhaka kunye nokunyanga, emva koko ube yiPPGI.Ukongeza ekukhuselweni kwe-gi layer, i-organic coating ikhusela umbala we-coil yensimbi efakwe kwi-rust, kwaye ubomi bayo benkonzo bumalunga namaxesha angama-1.5 ubude kunabo be-galvanized coil.

Umbala wePupolar we-matte ppgi iikhoyili zentsimbi:
-umqondiso omnyama: ral9004
- amalahle: ral7016
- izitena ezibomvu: ral3000
- itshokolethi / maroon: ral8017
- ithayile ebomvu: ral3022

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

https://www.win-road.com/pre-painted-steel-coil-ppgi-ppgl/

Ikhoyili yeMatte PPGI

Ifilimu yepeyinti ye-PPGI eyenziwe ngesinyithi esenziwe ngesinyithi esinokuthi siyenze i-10-30microns.Ukuphakama kwefilimu yepeyinti, ixesha elide ubomi benkonzo yombala.

Izinto zokupeyinta zokuthengisa ezishushu ppgi yi-PE, SMP, HDP, PVDF, ects.

1. Ipeyinti ephezulu: PVDF, HDP, SMP, PE, PU

2. I-Primer Paint: I-Polyerethane, i-Epoxy, i-PE

3. Ipeyinti yangasemva: I-Epoxy, i-Modified Polyester

PPGI Steel Coil Specification

Ukutyeba	0.12mm-1.5mm, (11gauge-36gauge, okanye ngokwemfuno yomthengi)
Ububanzi	750mm-1250mm (okanye ngokweemfuno zomthengi)
Umgangatho	GBT2518-2008, ASTM A653,JIS G3302,EN 10142, kunye njl.
Ibakala lezinto eziphathekayo	SGCC/SGCH/CS Uhlobo A kunye ne-B/DX51D/DX52D/G550/S280/S350 ETC.
Ukwaleka	Umphezulu wegalvanized kunye nokwaleka Zn40-275g Umphezulu weGalvalume kunye nokwaleka AZ30-AZ150
Umgangatho wombala	Inombolo ye-RAL njengesicelo somthengi
Ukwaleka	Ukwambathisa okuphezulu: 5-30UM
Ukwaleka	Ukwaleka ngasemva: 5-15UM
Isiseko sentsimbi	Intsimbi eGalvanized
Unyango lomphezulu	I-Passivation okanye i-Chromated, i-Skin Pass, i-oyile okanye i-Unoiled, okanye i-Antifinger print
Ubunzima bekhoyili	Iitoni ezi-3-5 okanye njengemfuno yomthengi
Coil yangaphakathi Diameter	508/610mm okanye ngokwesicelo sakho

https://www.win-road.com/ppgi-ppgl-products/

I-Matte PPGI Coil Packing kunye nokuThunyelwa

IiCoils zentsimbi ezipeyintiweyo RAL Imibala

Ikhoyili yeMatte ppgi inemibala eyahlukeneyo yokukhetha umthengi.

Abathengi banokujonga ixabiso nge-ral NO.kunye nobukhulu kunye nobubanzi.

Ipeyintiweyo ye-Galvalume Steel Coils yokuFaka isicelo

Ngokutsho kohlolisiso lwemizi-mveliso kwiminyaka yakutshanje, iikhoyili zentsimbi ezipeyintwe kwangaphambili ziseyindlela yokukhula kwezokwakha, ezobunjineli, ukufuya izilwanyana, ii<em>photovoltaics, izixhobo zombane zasekhaya kunye namanye amashishini, ngokukodwa ukusetyenziswa kwezakhiwo, ukufuywa kwezilwanyana ne<em>photovoltaics.

Iikhoyili zeMatte PPGL zinosetyenziso oluninzi, umzekelo:
Ishishini lokwakha: izicelo zangaphandle: uphahla, izakhiwo zophahla, iingcango eziqengqelekayo, iikhiyoski, izivalo, iingcango zonogada, amagumbi okulinda ezitalatweni, imigudu yokungena umoya, njl.njl.
Izixhobo zombane: iifriji, i-air conditioner, izitovu ze-elektroniki, iigobolondo zomatshini wokuhlamba, izitovu zeoli, njl.
Ishishini lezothutho: iisilingi zeemoto, iipaneli ezingasemva, iihoardings, amaqokobhe emoto, iitrektara, iintloko zeenqanawa, njl.njl.
Uninzi olusetyenziswayo: iiworkshops zentsimbi, iiworkshops zebhodi ezihlanganisiweyo, kunye neefektri zeethayile zensimbi ezinombala.

FAQ

Umbuzo: Ngaba uyayibonelela ngesampulu yekhoyili ye-ppgl?
A: Ewe, sinikezela ngesampuli.Isampuli isimahla, i-courier yamazwe ngamazwe iphethe.

Iindleko zekhuriya ziya kubuyela kuwe xa sele sibambisene.

Q:Ngaba uyalwamkela uhlolo lomntu wesithathu?
A: Ewe, siyakwamkela ukuhlolwa komntu wesithathu.
Umbuzo: Liliphi ixesha lokuhambisa?
A: Ngokubanzi 25-35days.
Umbuzo: Ngaba unaso isitokhwe?
A: Ngemveliso yesitokhwe, nceda uqhagamshelane nathi ukuze uqinisekise.